How to, Paper Crafts, Handmade, DIY, Recycle, Diecuts, Crafting on a Dime

Oh so Cold! Altered Envelope Journal

January 31, 2023

Hi everyone! I’m back today with an altered envelope that I turned into a junk journal. For the base (cover) I used a business size #10 envelope and some dies, thinlits and embossing folders by Eileen Hull. Let’s get started!

I gathered all the scraps of cardstock, embellishments and bits and pieces to make this journal. As I have said in past blog posts this is a great way to use up what you have laying around from other projects.

The first thing I did was seal the flap of the envelope and then fold in half to create the cover. I cut a piece of cardstock and an old dictionary page to fit inside. I also added a fussy cut polar bear printable as the third page. I folded all together, punched two holes into the spine of the cover and all inside pages. I threaded a needle with ribbon and sewed and tied all together into a nice little bow on the spine.

I adhered patterned cardstock to the inside and outside of the cover. I layered more patterned cardstock and glued to the cover but I left the top open so I could add tags to the pocket. I fussy cut one the little girls that I printed from the Let it Snow Art Dolls Printables. I had actually printed this out for a Christmas project but they didn’t print correctly. I couldn’t throw out the printable and I figured since this was a junk journal why not use it? I adhered the girl image onto the “pocket”, cut and glued two snowflakes together from the Wreath and Snowflake Thinlits and cut a label from the Library Pocket ATC and Tabs Thinlits and glued onto the snowflake. I put together the word “Journal” from alphabet stickers and placed onto the label.

I cut a pocket from the Frame Pocket Journal Diecut and embossed with the 3D Tablecloth Embossing Folder, folded the flaps and adhered to the inside cover. I dug out a paper snowflake, glued to the pocket and added a button to the center of it. I added tags to the pocket. One of the tags I added one of the fussy cut girl, plus a tab which I cut from the Library Pocket ATC and Tabs Thinlits and a chipboard snowflake to the tab. The opposite page I decorated with lace, bits of velvet ribbon and a scrap of patterned cardstock.

The next pages I added scraps of cardstock, Ric Rac and a stamped snowman image to the page. The opposite page I cut and distressed a piece of patterned cardstock and adhered to the page. I cut the larger snowflake from Tim Holtz’s 3D Snowflake Impresslits (retired), placed onto the page along with a strip of patterned cardstock and a sequin which I glued to the center of the snowflake.

The next set of pages I glued a strip of patterned cardstock to the top of the page, placed the chipboard “winter” sentiment on the strip along with scraps of cardstock, vellum and a small snowflake from Doodle Christmas Thinlits. The other page I cut and distressed a piece of patterned cardstock, glued to the page, placed a chipboard “oh so cold!” sentiment onto the patterned cardstock along with another small snowflake. I didn’t add any embellishments to the back side of the polar bear printable.

The next set of pages I placed a small penguin behind a specimen slide that I had in my stash and glued onto the page. I finished by adding the “snow fun!” sentiment, mini snowflake and chipboard snowflakes. The opposite page I added various laces, sheer fabric and Ric Rac to the page.

The last page I adhered scraps of patterned cardstock to the top and a smaller snowflake from the 3D Snowflake Impresslits and a sequin to the center of the snowflake.

I applied Stickles to the girls bonnets and small black gems to the coat of the taller girl to finish.

If you haven’t been by Eileen’s blog lately you can find the latest post HERE.

Supplies

Sizzix/Eileen Hull: Frame Pocket Journal Diecut

Sizzix/Eileen Hull: 3D Tablecloth Embossing Folder

Sizzix/Eileen Hull: Wreath and Snowflake Thinlits

Sizzix/Eileen Hull: Library Pocket ATC and Tabs Thinlits

Sizzix/Tim Holtz: 3D Snowflake Impresslits (retired)

Sizzix/Olivia Rose: Doodle Christmas Thinlits

Let it Snow Art Dolls Printables

Diecut Machine

Various Plain, Patterned Cardstocks and Vintage Page

Scissors

Gems, Lace, Ric Rac, Button

Stickles

Needle and Ribbon

Paper Cutter

Beacon Adhesives: Zip Dry Adhesive

(Products listed above are Affiliated Links for your convenience)

DISCLAIMERS

This blog is compensated to provide opinion on products, services, websites, and various other topics. Even though the owner(s) of this blog receives compensation for our posts or advertisements. I always give my honest opinions, findings, beliefs, or experiences on those topics or products. The views and opinions expressed on this blog are purely my own. Any product claim, statistic, quote or other representation about a product or service should be verified with each manufacturer, provider, or party in question.This blog contains affiliate links, clicking and shopping through these links helps to support and run Tonya Trantham Designs – Creative Paper Addiction at no additional cost to you. Today’s features are Sizzix, Eileen Hull, Scrapbook.com and A Cherry on Top Crafts Products.

Thanks for stopping by, hope your Tuesday is awesome and enjoy creating!

A Beary Merry Christmas Cork Journal

December 5, 2022

Hi everyone! I’m super excited to share this project with y’all. Eileen Hull’s teams were sent a package of Surfaces Cork Roll from Sizzix to create something using Eileen’s dies, thinlits and embossing folders. I used the Notepad Diecut, Wreath and Snowflake Thinlits, the label from the Card Caddy Diecut and the hinge from the Treasure Box Diecut (retired) along with some other thinlits and embossing folders from Olivia Rose and Tim Holtz. Let’s get started!

First, I gathered up all my supplies before starting.

I applied Adhesive Sheets to both side of a piece of Mat Board, cut the cork and a piece of cardstock to fit the mat board. Next I placed the diecut onto the mat board and run through the Diecut Machine. I cut the cover twice.

I placed the journal cover into the 3D Tree Rings Embossing Folder but could not get it to run through the diecut machine, which sent me into a mini panic. But after much tinkering I used two sets of cutting plates and a crease pad to emboss both covers.

I peeled the cork and mat board away from one of the tabs on the spine.

This will make the spine have a “flat” look once it is glued together.

I used a combination of chalk inks on the cover and I also applied with my finger Rose Gold Luster Wax in random spots.

I picked three different shades of green from the Surfacez Eclectic Color Collection and cut three wreaths from the Wreath and Snowflake Thinlits. I cut two “open” and wove them through the wreath that I didn’t cut and adhered to the cover.

From the same paper collection I cut out all the parts for the bear from the Doodle Christmas Thinlits and used a combo of adhesive sheets and adhesive to piece together.

I lightly inked over parts of the bear and adhered to the cover.

I punched two holes in the top and bottom of the spine with a Crop-A-Dile and set eyelets into each hole before stringing elastic cording through the holes and tying off.

I covered with cardstock a label from the Card Caddy Diecut and the hinge from the Treasure Box Diecut and adhered on top of each other before gluing to the spine.

For the booklets inside the journal I had an A6 plain planner notebook but it was too tall. No problem!

I measured and cut the notebook in half (2 7/8″) and I also added a bit of glue to the stitches on each end of each book to keep it from coming undone.

I covered each book with a festive Christmas cardstock and added a present and a tree from the Doodle Christmas Thinlits and seals from the Prize Ribbons Diecut (retired) onto each book.