Wonder Tag

Hi everyone! I am back with another project I created for ColorBox for their Creativation booth this past January. I know it took me forever to share these projects with everyone but I was trying to space my posts out so I didn’t overwhelm everyone with butterfly projects. ūüė¨

For this project I placed a 3 1/4″x5 1/2″ white tag in the Open Book Embossing Folder, placed between two cutting plates, placed onto the platform and run though a¬†Diecut Machine.¬†I inked an Art Dauber with¬†Jade Premium Dye Ink¬†and lightly rubbed over the embossed tag.

I placed a piece of White Cardstock on top of the Ornate Frame Diecut and placed between cutting plates and run through the diecut machine. I inked an art dauber with Dandelion Premium Dye Ink and lightly ink over the Ornate Frame Diecut. I added Gold Gems to the diecut and adhered the diecut to the center of tag.

Next I placed the outline of the butterfly stamp, from the¬†Butterfly Clear Stamps¬†onto the¬†MISTI Stamping Tool¬†and inked with¬†Leather Premium Dye Ink¬†and stamped onto a piece of White Cardstock. I placed the “filled in” image of the Butterfly stamp onto the MISTI Stamping Tool (be sure to line up the stamp with the stamped butterfly cardstock image) and inked the stamp with¬†Sandstone Premium Dye Ink¬†and stamp on top of the stamped butterfly image.

I loaded three art daubers with the following Premium Dye Inks: Bahama , Atmosphere and Dandelion. I inked the majority of the butterfly image with Atmosphere Premium Dye Ink. I inked over a small portion the wings, near the body, with Bahama Premium Dye Ink. Lastly I inked the inner and outer edges of the wings with Dandelion Premium Dye Ink. I fussy cut the butterfly image out with Scissors. I adhered a metal tab to the body of the butterfly and added a Pink Gem to the metal tab for the head. I also added two Pearl Pins and Foam Pop Dots to the back of the butterfly and placed in the center of the tag.

I placed the “For Small Wonders” stamp onto an the MISTI Stamping Tool and inked with Leather Premium Dye Ink and stamped onto a piece of green cardstock . I cut out the “Wonder” sentiment with a¬†Paper Cutter¬†and cut another piece of yellow cardstock slightly larger than the sentiment and adhered both together. I added foam pop dots and placed sentiment under the butterfly.

I cut and adhered lace and Pom Pom trim to fit bottom of tag. I cut two 8″ pieces of lace and two gold Ric Rac and trim and strung through the top of tag, tied off with twine and adhered a button on top of twine. As always if you have any questions about this project please let me know.

SUPPLIES

ColorBox: Art Daubers
Lace 
Pom Pom Trim
Gold Ric Rac
Gold Trim
Gold Gems
Pink Gem
Pearl Pins (2)
Sizzix: Ornate Frame Diecut
Maggie Holmes: Open Book Embossing Folder
MISTI Stamping Tool
White Tag
Button
Metal Tab
Scraps of Green and Yellow Cardstock
Beacon Adhesive: Zip Dry Adhesive
Twine 

(Products listed above are Affiliated Links for your convenience)

Thanks for stopping by, hope your Wednesday is wonderful and enjoy creating!

The Bloom House

Hi everyone! I am back with a fun little project I created for ClearSnap!

I placed the House/Pocket Stitchlit Diecut on top of the Watercolor Paper and placed in between cutting plates and run through a¬†Diecut Machine. I cut out two House/Pocket diecuts.¬†I placed watercolor paper on top of the smaller “wall” of the Box, Make It 3D Diecut (retired) and placed in between cutting plates and run through diecut machine. I cut out two walls diecuts.¬†I inked the Jumbo Crackle Background Rollagraph (I couldn’t find a link for the Rollagragh but found this CrackleBackground Molding Mat…same design) with Top Boss Clear Embossing Stamp Pad (Jumbo Handle doesn’t need ink cartridge) and roll over both house diecuts and “wall” diecuts.¬†I applied White Embossing Powder, shook off excess and set with a Heat Tool.

I inked an Art Dauber with Dandelion Premium Dye Ink and applied ink to both houses and wall diecuts. Next I loaded an art dauber with Palomino Dyestress Blendable Dye Ink and randomly apply to both the houses and walls diecuts. I adhered walls to the inside edges of house diecuts. 

I cut a piece of watercolor paper 1 1/2″x7″ and fold in half and inked a glass tray with Palomino and Cattail Dyestress Blendable Dye Inks, add water to both inks and painted both sides of the 1 1/2″x7″ watercolor paper.¬†

I inked the edges of roof with Platinum Pigment Ink and glued to the top of the house.

I placed the Textured White Cardstock on top of the Beaded Oval Diecut. Then placed between cutting pads and run through diecut machine. I loaded an Art Dauber with Mini Watermelon Classic Pigment Ink and inked edges of diecut. Next I inked an art dauber with Palomino Dyestress Blendable Dye Ink and lightly ink over whole diecut and adhered to the front of the house diecut.

I inked a scalloped circle and circle punches with Mini Watermelon Classic Pigment Ink and added to the center of the diecut on front of house. I adhered a flower punch to the center of punches, adhered a sequin and gem to the center of flower. I printed from computer the word “BLOOM”, cut out and ink edges with Mini Watermelon Classic Pigment Ink and added to house. I tied a bow from pink thread and adhere underneath flower diecut on the front of house.

Next I cut a 3″x5 3/4″ piece of watercolor paper and rounded the corners of paper with a Corner Rounder. I loaded an art daubers with Shamrock, Citronella and Palomino Dyestress Blendable Dye Inks and randomly inked over the watercolor paper.¬†

I loaded a paint brush with water and “paint over” ¬†the inked paper and once dry adhered to the “tabs” on the bottom of house.

I placed textured white cardstock on top of Flowers Journaling Card Diecut and placed between two cutting plates and run through diecut machine. Next I cut a leaf from crinoline fabric using the same steps as used to cut out the flowers diecut.

I inked an art dauber with Mini Watermelon Classic Pigment Ink and inked the edges of two of the flower diecuts. Next I inked both the larger and smaller flower diecuts with Dandelion Premium Dye Ink. Next I inked the  crinoline fabric leaf diecut with Shamrock Dyestress Blendable Dye Ink. 

I shaped and adhered the flowers together and add leaf to the back of flower. I looped thread several times and create a messy bow and adhere to the corner of the house along with the flower and leaf and added a Glossy Dot to the center of flower before adhering to the house. 

I added a pre-made flower to the backside of the handmade flowers. I also shaped stem with a small wooden dowel.

As always if you have any questions about this project please let me know.
I would also like to submit this project for the following challenge:

Word Art Wednesday: Anything Goes #382-#383


SUPPLIES USED:
ColorBox: Jumbo Crackle Background Rollagraph (CrackleBackground Molding Mat…same design¬†)
ColorBox: Jumbo Handle Self Inking ( No cartridge used)
ColorBox: Art Dauber
ColorBox: Platinum Pigment Ink 
Sizzix/Eileen Hull: Box, Make It 3D Diecut (retired)
 Diecut Machine    
Scraps of Patterned Cardstock
Beacon Adhesive: Zip Dry Adhesive
Glass Tray
Spellbinders Nestabilities: Beaded Oval Diecut
Pink and Main: Rainbow Glossy Dots
Sequin
Pink and Mint GreenThread 
Scrap of Crinoline Fabric
Various Punches (Flower, Circle, Scalloped Circle) 

Thanks for stopping by, hope your Wednesday is wonderful and enjoy creating!

Botanical Wreath Tag

Hi everyone! I am back with another tag I created. I had actually created this tag for ColorBox for use in an advertisement in Creative Scrapbooker Magazine last year. I kinda let this post sit in the draft folder of my blog and never got around to posting the directions on how I made this…so here it is! ūüėĀ

I started by applying Dandelion Premium Ink to a glass tray, adding water and placing the tag into the watered down ink and removed. I cleaned off the tray and applied the following inks: Rose, Jade and Spring Premium Dye Inks to the glass tray and added water. I randomly place the Tag in the different colors of ink until desired effect was achieved. 

Once the tag dried I embossed with the English Botanical Embossing Folder.
I cut from a brown/wood looking cardstock a Wreath Diecut and inked the leaves with Ice Jade Chalk Ink. The wreath was bigger than the tag so I adhered to the front and wrap and glue the rest to the back of the tag.
Before glueing the rest of the wreath to the backside I measured and cut a piece of Yellow and Ivory Mini Dot Reverse Cardstock the size of tag and adhere to the back of the tag. 

I cut from White Cardstock flowers and leaves from the Stitchy Flowers and Leaf Diecuts and from the Flower and Leaf Stitchlits Diecuts (retired). I added Rose Premium Dye Ink to glass tray, water and painted two larger flowers and once dry shaped with a Stylus and add two sequins and a flat back pearl to the center of each flower. I inked leaves completely with Ice Jade Chalk Ink, shaped with a stylus and adhered to the backs of each flower. I shaped with a stylus three of the mini white cardstock flowers and add a gem to each center.

I tied two bows with cording and adhere to the back side of the large flowers before gluing to the tag. I finished off by adding sequins randomly to the front of the tag and cutting 8 inch piece of lace and tie to the top. As always if you have any questions about this project please let me know.

SUPPLIES USED:

ColorBox: Dandelion Premium Ink
ColorBox: Spring Premium Dye Inks
ColorBox: Rose Premium Dye Ink
ColorBox: Ice Jade Chalk Ink
Canvas Corp: Tag
Canvas Corp: Yellow and Ivory Mini Dot Reverse Cardstock 
Sizzix/Brenda Walton: English Botanical Embossing Folder 
Sizzix/Eileen Hull: Flower and Leaf Stitchlits Diecuts (retired)
Spellbinders: Wreath Diecut
Glass Tray
Beacon Adhesive: Zip Dry Adhesive
Gems
Cording
Sequins
Lace
Flatback Pearls
Thanks for stopping by, hope your Tuesday is awesome and enjoy creating! 

Spring Butterfly Tag

Hi everyone and happy Monday! I want to share a springy tag I created for ClearSnap!

I started by inking a glass tray with Hydrangea Blends Ink, adding water and placing the Tag in the ink mixture. The tag didn’t have to be completely covered so I removed and let dry. I cleaned the glass tray and inked with Frog Blends Ink, added a small amount of water to ink and randomly lay parts of the tag in mixture, removed and let dry. Next I inked the Simple Dots Rollagraph with Glacier Lake Archival Dye Ink and roll over tag.

I placed the Tear Drop Circle Diecut on top of a piece of Textured White Cardstock and  placed between two cutting plates and ran through the Diecut Machine. I placed the first Butterfly Art Screen on top of the Tear Drop Circle Diecut and inked an Art Dauber with Citronella Dyestress Blendable Dye Ink and ink over the screen and removed.

I placed the second Butterfly Art Screen directly over stenciled area of butterfly, ink art dauber with Shamrock Dyestress Blendable Dye Ink and ink over screen and removed.

I placed the third Butterfly Art Screen directly over stenciled area of the butterfly, inked an art dauber with Moonstone Dyestress Blendable Dye Ink and ink over screen.  

Once I removed the screen I inked an art dauber with Old Rose Ink from the Sunset Petal Point Inks and ink over the edges of diecut.¬†I added pop dots to the back of the Tear Drop Circle Diecut and place on top of tag.¬†With a paper cutter I cut a piece of patterned cardstock 1 7/8″x4 1/4: and cut a “v” in the end which creates a banner. I adhered the banner to the tag.

I cut from textured white cardstock Flowers and leaves from crinoline fabric from the Journaling Cards Flowers  and Leaves Diecuts. I inked an art dauber with Old Rose Ink from the Sunset Petal Point Inks and ink the edges of two of the flower diecuts, shaped and adhere both flowers together. I added a button to the center of the flower. I inked an art dauber with Olive Ink from the Sunset Petal Point Inks and ink over the crinoline fabric leaf and adhered to back of flower before adding to tag. Next I made two bows one from seaming binding and one from thread and adhered both to the corner and underneath flower.


I placed the “For Small Wonders” stamp from the¬†Butterfly Clear Stamp Set¬†on the¬†MISTI Stamp Tool¬† Ink with¬†Leather Premium Dye Ink¬†and stamp onto a piece of textured white cardstock. I cut the word “Small” and “Wonders” out with a paper cutter. Cut a “v” in the end of each to create a banner and adhered both to the bottom of stenciled butterfly and under the flower.¬†I cut three 8 inch pieces of ribbon and lace and threaded all pieces through the top of tag. Tie off and adhere a button to ribbon and lace. As always if you have any questions about this project please let me¬†know.

SUPPLIES USED:

ColorBox/Eileen Hull:Hydrangea Blends Ink
ColorBox/Eileen Hull:Frog Blends Ink
ColorBox: Art Dauber
ColorBox:  Leather Premium Dye Ink 
ColorBox: Butterfly Clear Stamp Set 
Canvas Corp:Tag
Sizzix: Diecut Machine
Spellbinders: Tear Drop Circle Diecut 
Lace
Seam Binding
Button
Crinoline Fabric
Thread
Beacon Adhesive: Zip Dry Adhesive

 Thanks for stopping by, hope your Monday is wonderful and enjoy creating!

Dragonfly Photo Box

Hi everyone! I am back today with a Photo Box I created using Eileen Hull’s Stamp and Photo Storage Diecut and embossing powders by ColorBox. I started by¬†cutting two Stamp and Photo Storage Diecut¬†from Matboard using a Diecut Machine.¬†

I cut one of the flaps off of each diecut and placed one of the diecuts in the Floral Frame Embossing Folder and run through the diecut machine. I put the box together according to directions on the Stamp and Photo Storage Diecut packaging.
I used a hot glue gun to adhere the two diecuts together to create a box and I cut to fit three pieces of cardstock and adhere to the sides of the box. 

I adhered lace and flat back pearls to the bottom of the box. 

Next I cut two flowers from the Stitchy Flowers and Leaf Diecuts and punch leaves from the mini leaf punch and shape and adhere to the bottom of the box and add a flat back pearl to the center of the flower.

I used two dragonfly diecuts from my own personal stash and ink completely with Aquamarine Chalk Ink. 

After the ink dried I inked both with Top Box Clear Embossing Ink and added Copper Embossing Powder randomly on both dragonfly diecuts. 

I set the embossing powder with a Heat Tool and applied more Top Box Clear Embossing Ink and complete the same steps with the Gold Sparkle and Opalescent Clear Embossing Powders until desired effect is achieved.

I added adhesive to the center of one of the dragonfly diecuts and glue on top of the other dragonfly diecut. 

I bent the wings up on the dragonfly, adhere to the top of the photo box and add a flatback pearl to finish off the box.

This would be a perfect gift to hold wedding photos, graduate or personal photos in. Also below is links to most of the tools and supplies I used if you want to recreate this project for yourself. As always if you have any questions about this project please let me know.

SUPPLIES USED:

Sizzix/Eileen Hull: Stamp and Photo Storage Diecut 
Sizzix: Matboard
Sizzix: Diecut Machine
Sizzix/Brenda Walton:(Be Merry 2 PK Embossing Folders) Floral Frame Embossing Folder
Sizzix/Eileen Hull: Stitchy Flowers and Leaf Diecuts
ColorBox:(Surf’s Up Chalk Ink Set )¬†Aquamarine Chalk Ink
Beacon Adhesive: Zip Dry Adhesive
Flatback Pearls
Lace
Thanks so much for stopping by, hope your Wednesday is wonderful and enjoy creating!

Lucky Shamrock Tag

Hi everyone and Happy March the 1st! I wanted to start off the month by sharing a shamrock tag I created!

I started by cutting Good Luck on Ivory Cardstock 6.25″x3.125″ and punching a hole at the top center of the tag.

I inked a glass tray with ColorBox Blends Leaf Ink, added water to the ink, loaded paint brush and splatter tag with mixture. I repeated Step 2 but with ColorBox Blends: Frog Ink and I let the tag dry.

I inked the Shamrock Rubber Stamp with Wicked Black Ink and stamp onto a piece of textured green cardstock. I fussy cut the shamrock image out and adhered an acrylic heart gem to the center of the shamrock image.

I inked the “lucky” sentiment from the Dress Up Stamp and Cut Set and stamp onto white cardstock, cut out and ink edges with Ice Jade Chalk Ink and cut a banner from the ¬†piece of green cardstock, emboss with the Waffle Embossing Folder (retired). Next I inked the edges and over the embossed area with Ice Jade Chalk Ink. I adhered the sentiment to the banner and the banner to the tag. I glued the shamrock image underneath the sentiment with a small portion hanging off the tag.

I finished off the tag by cutting three 6″ pieces of lace and threaded through the hole at the top of the tag, tied off with thread and adhere a button to the lace. As always if you have any questions about this project please let me know.

Thanks for stopping by, hope your Friday is awesome and enjoy creating!

Love Treat Tote

Hi everyone! I’m back with a quick and easy Valentine’s Day project for ClearSnap!

I started by cutting one side of the Tiny Dots Creative Card off with a Paper Cutter. The final holder/tote should measure 4 1/8″x5 1/2″. Next I measured one inch at the top of the card and measure one inch at the fold of the card and scored both at the one inch marks and folded.

I inked a decorative matboard piece (I used what I had in my stash) edges and outer corners with Rosebud Classic Pigment Ink. Once dry I inked around the edges of the diecut with Watermelon Classic Pigment Ink and let dry. I punched a heart from patterned cardstock, inked the edges of the heart punch with Rosebud Classic Pigment Ink and once dry adhered to the corner of the decorative diecut. I placed the swirl stamp with heart from the Thankful Clear Stamp Set onto the MISTI Stamping Tool and inked with Wicked Black Archival Dye Ink and stamp onto the decorative diecut. I added Clear Glitter Glue to the stamped image and let dry.
I placed a piece of an Adhesive Sheet on the back side of gold patterned cardstock and laid the “love” diecut from the Journaling Words Diecuts on the cutting plate plus the gold patterned cardstock and run through the Diecut Machine. I peeled the backing from the adhesive sheet and ¬†placed the “love” diecut on the decorative diecut. ¬†I punched a mini flower from patterned cardstock and place of the stamped heart and added a ¬†Glossy Dot to the center of flower.

I placed candy in a clear bag and place in the candy tote. 

I punched two holes through the tote and clear bag, added ribbon though holes and tied off with a bow.

I finished by adhering the decorative diecut underneath the bow. These really are quick to make and would make great little gifts for your family, co-workers or for a children’s Valentine’s Day party. As always if you have any questions about this project please let me know.

Thanks for stopping by, hope your Monday is wonderful and enjoy creating!

Vintage Heart Pocket Box

Hi everyone! I am back with a Valentine’s Day project that I created for ClearSnap!¬†

I started by placing the Matboard on top of the Heart Pocket Diecut¬†only covering the whole heart…not the pocket. I cut two hearts from matboard and two hearts from patterned gold cardstock.¬†I placed the matboard hearts, one at a time, in the Polka Dots Embossing Folder and run through diecut machine.¬†I inked the glass tray with Tutu Blends Ink and added water and painted both matboard hearts.¬†

Once both heart diecuts are dry I lightly inked over the embossed areas and edges of both hearts with Blush Pigment Ink and adhered patterned gold cardstock to the back of each matboard heart.

I placed patterned pink cardstock on top of the pocket of the Heart Pocket Diecut and ran through diecut machine. I adhered the tabs of the pocket diecut to the front of the embossed heart.¬†Next I placed Adhesive Sheets on the front and back of a piece of matboard before placing patterned pink and gold cardstock on top of the matboard. I placed the covered matboard on top of the smaller “wall” of the Box, Make it 3D Diecut (retired) or you can use the walls/sides from the Bag, Coupon, Mini Shopping Diecut¬†and cut two “walls”.

I folded the tabs of the “walls” and adhere to patterned gold sides of both hearts and glued gold trim around the walls.

I cut a paper doily in half and adhere to pocket along with lace to the edge of pocket and three buttons to the lace.

I cut a small heart from the matboard and from the Tiny Dots Creative Cards using the Heart Pocket Diecut. I adhered the Tiny Dots on top of the matboard and inked the edges with Petal Point Fluid Chalk Ink Pad: Soft Pastel-Rose Coral Chalk Ink and adhered to pocket.

Next I cut four flowers and leaf sprigs from Crinoline fabric using the Journaling Cards, Flowers and Leaves Diecuts. I inked the glass tray with Melon Blends Ink, added water and laid all the flowers diecuts in the ink mixture. Once dry I added a drop of Beacon Adhesive Zip Dry Adhesive to the center of flower and placed the other flower diecut on top and pinch and shape. I completed the same steps for smaller flower. I finished off the larger flower by adding a gem to the center and adhered to the corner of the small heart on the pocket. I inked the glass tray with Shamrock and Citronella Dyestress Blendables Dye Inks, added water and laid both leaf sprigs in ink mixture. Once dry I glued the sprig underneath the flower on pocket, added Tulle, pearl sprig and gold Ric Rac to corner of pocket. 

I added the smaller flower and one leaf from the leaf sprig to the bottom side of the heart and I added loops of gold thread underneath both flowers.

I punched a hole on both sides of the pocket and threaded 12 inches of seam binding through each hole, knotted and tie off on each side.

Now all you have to do is add candy for that special someone and tuck a small card in the pocket and it is ready to give as a gift and once it is empty it makes a nice wall hanging. As always if you have any questions about this project please let me know.

I would also like to submit this project for the following challenges:
Word Art Wednesday Anything Goes: Weeks #372-#373
Crafter’s Castle: February Challenge #14

Thanks for stopping by, hope your Wednesday is great and enjoy creating!

Lacy Heart Notebook

Hi everyone! I’m back with a quick project I created from a mistake I made…YIKES! ¬†When I was cutting out the cover and spine from the Passport Diecut. I was not thinking and laid the whole sheet of Matboard over the diecut cutting out the pages from matboard too. Well, instead of throwing it away I decided I would use it to create a mini notebook cover and add my own pages to it.

I placed the notebook diecut at the fold in the Lace Embossing Folder and placed and embossed both sides of the notebook. I loaded three Art Daubers with Moonstone, Citronella and Scuba Dyestress Blendable Dye Inks and inked with each color over the outside cover of the notebook.  

Either cut six lined papers or carefully remove six pages from a mini notebook. I choose to remove pages from a mini notebook. ūüėĀ I lined up with ¬†holes of the cover, marked holes and punch with a small hole punch. I threaded white twine into needle and sewed inside pages to the cover and tied off on the inside.

I cut from white cardstock another notebook diecut from the Passport Diecut and cut in half. I cut another 1/4″ off each side before adhering both to the inside cover.¬†Next I cut two pieces of aqua cardstock to 2 1/2″x3″ and emboss with the Lace Embossing Folder and cut both pockets at an angle and adhere to the inside cover.

I placed the Heart Cookie from the Cookies Clear Stamp onto an¬†Acrylic Block¬†and inked with Moonstone Dyestress Blendable Dye Ink and stamped onto a piece of¬†White Cardstock. I fussy cut the heart out and lightly ink edges with Scuba Dyestress Blendable Dye Ink. I cut from Crinoline Fabric with the¬†Journaling Cards, Heart Diecut¬†using a¬†Diecut Machine¬†and inked one heart with Scuba Dyestress Blendable Dye Ink and let dry.¬†From patterned cardstock I cut the smallest Scalloped Oval from the Spellbinders Nestabilities Classic Scalloped Ovals large Diecuts using a diecut machine and adhered the Scalloped Oval Diecut, stamped heart, inked crinoline heart and two sequins to the front of the cover. I printed from the computer the word “NOTES”, cut out and ink edges with Scuba Dyestress Blendable Dye Ink before adhering underneath the hearts on the cover.¬†I use a binder clip to keep notebook closed when not in use.

As always if you have questions about this project please let me know. 
Thanks for stopping by, hope your Tuesday is wonderful and enjoy creating!

A Heart Full of Thanks Card

Hi everyone! I ¬†know I have been missing in action but I traveled to Arizona to attend Creativation and let me just say it was lots of seminars, meeting new people, networking and getting to see the latest products that will be coming out this year! Plus once home I had another deadline to meet…you know how that goes? But I will share more about my time there later. ūüėÉ
I would like to share a quick card I created for ClearSnap. I started by inking the Swirl Heart Stamp with Wicked Black Ink and stamp onto a piece of blush Momenta cardstock. 

I fussy cut the heart image out and add flat back pearls.

I folded a 6″x6″ piece of patterned cardstock, from the MME On Trend Paper Pad, in half to create a 3″x6″ card base. I cut one 2″x6″, one 7/8″x6″ and one 1/4″x6″ from the On Trend Paper Pad and inked the edges with Platinum Ink. I adhered the three strips of cardstock to the base of the card and glued the heart image to the corner of the card.

I inked the Thanks Stamp with Wicked Black Ink and stamp onto a piece of white cardstock and inked the edges with Platinum Ink. I cut a cardstock mat to frame the Thanks sentiment and inked the edges of both the frame and sentiment with Platinum Ink. I adhered the frame and the sentiment together before gluing to the card.

I punched a mini flower and a leaf sprig from cardstock and adhered to the corner of the sentiment. I also added a flat back pearl to the center of the flower. 
As always if you have questions about this card please let me know.

Thanks for stopping by hope you Thursday is wonderful and enjoy creating!